If your drive is the bottleneck, this will make things worse. If you want to proceed:

You’re already using ffmpeg to get the sequence of frames, correct? You can add the -ss and -t flags to give a start time and a duration. Generate a list of offsets by dividing the length of video by the number of processes you want, and feed them through gnu parallel to your ffmpeg command.

My first thought was similar - there might be some hardware acceleration happening for the jpgs that isn’t for the other formats, resulting in a CPU bottleneck. A modern harddrive over USB3.0 should be capable of hundreds of megabits to several gigabits per second. It seems unlikely that’s your bottleneck (though you can feel free to share stats and correct the assumption if this is incorrect - if your pngs are in the 40 megabyte range, your 3.5 per second would be pretty taxing).

If you are seeing only 1 CPU core at 100%, perhaps you could split the video clip, and process multiple clips in parallel?

Considering that you are not using their software, was the laptop worth the premium you paid for it, vs buying from Clevo directly?

I figured the hardware and software coming from the same vendor would yield the best results, and wanted to support a company that supports right-to-repair, and Linux in general. But ultimately I found Pop!_OS buggy and had performance issues, so I’m not using their OS, and their firmware is causing issues with my SSD, so I’d like to be off of it as well (but was told "there’s no process for reverting to the proprietary firmware“ for the specific model I have). I could have bought a Clevo directly, saving hundreds of dollars, and probably had a better working machine.

Would not recommend System76. I’ve had many issues with my machine (primarily software, related to their buggy custom firmware, and Pop!_OS, until I ditched that for stock Ubuntu). Their support has been terrible - rather similar to OP’s, actually. I’ve had the laptop for about 2.5 years, and I’m checking practically daily for something to replace it.

You might get lucky. Based on https://support.system76.com/articles/system-firmware/, it doesn’t seem to be all models. Note however that the list is out-of-date; my galp5 is not listed, but does not work. Fortunately, I found this out doing a RAM check, and not a firmware upgrade.

My usb-c ports can be a little touchy, too. The SD card slot is also really bad - the card has to be positioned perfectly to slide in, or it jams. I’m also upset that the usb-c port can only be used for charging after a full boot. It cannot be used to perform firmware updates, or even to do a ram test. This means day-to-day, usb-c can be used, but I have to keep track of the barrel charger, just in case. This, of course, was not specified on the product details page (nor, I think, that only one of the two usb-c ports could be used for charging - it’s possible I overlooked that, but still frustrating on an expensive laptop that lists usb-c charging as a feature).

I currently have a System76 laptop, and sincerely regret my purchase. When I purchased it, the Framework was not out yet - I wanted to support a company that supports right-to-repair, and figured since they controlled the hardware, firmware, and software (Pop!_OS), it would be a good, stable experience. It has not been, and support has generally been poor. I know other people have had better experiences than I have, but personally, I won’t be buying from them again.

I haven’t personally used Purism, but former co-workers spoke really poorly of them. They were trying to buy a big batch for work, and said the build quality was awful. Additionally: https://youtu.be/wKegmu0V75s

The battery life and speakers will certainly be model dependent. The quality of the machine I received and the lackluster support, given the price I paid, are what I find most frustrating. The computer would be fine for ~$600, but I paid over $1000. I paid a premium expecting System76 to hold themselves to a high standard, and so far, they’ve let me down in multiple ways.

I do recognize with a different model, the experience could be 180°, but if buying from them is a roll-of-the-dice, for me personally, that’s enough to buy from someone else next time.

I would not recommend them. I bought a Galago Pro in 2020, and it’s been a huge disappointment. Pop!_OS was very buggy, and their support was not helpful. I ultimately installed Ubuntu, and it’s now significantly more stable, but I’m left asking the question “why did I pay a premium for a clevo, when I’m not getting anything out of the custom software or support?”

Even with Ubuntu, it’s not a good laptop. The speakers are worse than my phone, a fully charged battery will die completely in less than a day when the laptop is suspended, it runs unbelievably hot. As a developer who depends on this machine for daily work, it’s been intensely frustrating.

It’s possible to hit issues, especially if different distros are using different major versions of desktop environments or applications, but in practice, I don’t think it’s something that really needs to be worried about.

If you were to upgrade/fresh install, and copy your home folder over, you’d have the same experience - it’s not much safer than sharing the home partition, except that you’re (hopefully) doing that less. You could still easily go from distro A using version 2 of something, to distro B using version 3, and then decide you don’t like it and try to roll back to distro A. If in the process your config was upgraded in place (as opposed to a new, versioned config being made*), you could have problems rolling back.

With configs, you can usually just delete them (or, less destructively, rename them, in case you decide you want them back), and let the application make a new default one for you. With other files (e.g. databases), you might be in more trouble. But a good application will tell you before doing an upgrade like that, and give you a chance to backup the original before upgrading in place. When asked, it’s probably a good idea to take a backup (and not just for this distro hoping case).

*For any developers reading this, this is the correct way to upgrade a config. Don’t be destructive. Don’t upgrade in place. Make a copy, upgrade the copy, and include a version in the file name. You can always tell the user, so they can remove the file if they want, but let them make the choice. If you can’t (e.g. the database scenario, which could be large), tell the user before doing anything, so they can choose whether or not to backup.

You mean with config files stored in your home directory? Or something else?

When you install, whatever you install, partition your drive so that /home is it’s own partition. Then if/when you reinstall, distrohop, whatever, you don’t have to worry about copying over your data. Just use the same /home partition, and format the others. You can actually use this to try multiple distros at the same time - you can install them in different partitions, but have every install use the same /home partition. This is a nice way to test new distros without blowing away your stable install.

Now, for my distro recommendation - Ubuntu gets a lot of hate, but honestly, after 15+ years of Linux, and having tried Mint, Fedora, Arch, Manjaro, and many others, I always end up back on Ubuntu. It’s easy, it’s stable, and it stays out of my way.

The defaults are good, but you can customize as much as you want, and they offer a minimal install (as of 23.10, it is the default) which comes with very few applications, so you can start clean and choose all the applications you want.

Unless you are excited to tinker, I’d really recommend starting simple. Personality, I just want the OS to facilitate my other activities, and I otherwise want to forget about it. Ubuntu is pretty good for that.

Since most phones (if not all), use an encrypted filesystem. With such, no service can’t start if the device isn’t initially unlocked after reboot, including Find my device.

Android developers can specify that their apps need to run before the pin is entered, via direct boot mode. This is how alarms still work, even if your phone takes an upgrade overnight, and restarts automatically as part of that process.

I can’t say whether Google’s Find My Device currently does this, but there is no technical reason it can’t.

Hmm, strange. The last comment from Dan (second to last comment on the thread) makes it sound like their is another thread, and other users with the same problem:

Whew, I found the other thread and am happy to see that others are encountering this too, and it’s not some super duper weird thing with just my computer…

I tried searching a bit to see if I could find it quickly, but didn’t turn anything up. Maybe if you comment there, though, they could link you to the other thread, and they might have more info.

That sounds like a threading issue. If the app tries to run a task on its main thread, and that task takes a long time (in particular, longer than expected), it could cause the UI to lock up.

Do mouse interactions still work? Does anything on the UI update at all? If not, I’d bet on a task getting stuck on the main thread.

Note that this doesn’t have to be an intense task - you may not see a CPU/network/disk spike. It could be a deadlock scenario, where multiple threads are waiting for the same resources, and each locks some, but not all of the resources. None can move forward, no work is done, everything just hangs waiting for resources locked by other threads.

I’m on a laptop with hybrid Nvidia/Intel graphics, and Wayland has been working fine for me. I typically run in “on-demand” mode, but I’ve used both strictly Intel and strictly Nvidia modes as well, and it’s been fine.

I think the only real issue I’ve had is that Splitgate refuses to launch in Wayland, so I switch to X if I want to play - general computing works fine, native apps have had no issues, and all the other games I’ve played have launched without issue.

The Nvidia GPU is a 1650 TI, and I’m on the Nvidia 535 driver.

If you’d like them out of Google, but still on your phone:

You can use Google takeout to download all of your photos. Then delete them from Google, and copy the images you downloaded back to your phone manually. Finally, use a gallery app that can access files stored anywhere on the file system to view them (Simple Gallery seems to work pretty well - it should automatically find the images regardless of which folder you stick them in).

JetBrains with vim bindings for me.

I had to use vi for work (only editor installed on the servers), and it snowballed and now I can barely type in anything that doesn’t have vim bindings.

The first few days were pretty rough, but I learned the absolute minimal basics, and then just organically learned features as I needed them/whenever I felt like what I was doing was tedious, and there had to be a better way. It’s been about 10 years, and I’m still learning!

One small suggestion, check YouTube for videos of people showing off vim features, e.g. https://youtu.be/5r6yzFEXajQ. You won’t remember everything from one watch, but it’ll help you see what is possible/how powerful vim is, which can guide your “this is so painful how do I make this better” searches down the line.

What are you trying to use it for? If you just need basic mapping, you might look at Organic Maps.